FSP Group FSP300-60THN 300W Power Supply 115 / 230 V

SKU: 21294   Condition: New   Availability: Instock - Ready to Ship!

$31.00 Qty:

Features / Specifications

---

FSP Group FSP300-60THN 300W Power Supply 115 / 230 V


Features

Complied with ATX12V 2.0 standard

High efficiency and reliability

Remote On/Off function

Internal 12V DC fan included

Noise Killer (Thermal fan speed control function)

Low noise and ripple

Complies with FCC part 15 subpart J Class B and CISPR 22 Class B

Output over voltage, short circuit, and over current protection

100% Hi-pot, ATE, and burn-in tested

Re-settable power shut down

Approved by UL 60950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)

Specification

Temperature Range: Operating 0° C ~ +25° C on full load; De-rate 2W/C from +50° C to +25° C;

storage & shipping -20° C ~ +65° C

Humidity: 90% on operating and 95% on storage

Dielectric Withstand: Input to frame ground 1800V AC for 1 second

Efficiency: 70% at minimum measured at nominal AC main voltage and frequency with maximum load on all output

Rise Time: Less than 20ms on all output

Hold-up Time: 17ms minimum at nominal input voltage

Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)

Leakage Current: Not exceed 3.5mA

MTBF: 100,000 hours on maximum load at +25° C degree

Dimension (WxHxL): 150x86x140mm/6”x3.4”x5.5” inches

Input Characteristics

Input Range: +/-10% of 115 / 230 V, Manual selection

Frequency: 47~63Hz

Input Current: 7A (RMS) @115V AC, 3.5A (RMS) @230V AC

Inrush Current: 80A max cold start, 100A warm measured at 264rms/50Hz